The fact is it isn’t unheard of to paint in colder winter climates. Professional painters have the capacity to paint any time of the year. It’s just not ideal weather. The perfect temperature and best conditions, however, will allow the paint to dry correctly. These would entail warm, dry weather.
That involves not only the day of the project but several days before and after the work takes place. You want the material prepared for the paint and the paint not to be disturbed after application. The temperature should remain consistent throughout the day, with not too much of a drop at night.
Going from warm down to too chilly can result in a reaction from paint to the point that it won’t cure, leaving you with peeling and cracking. Expert exterior painting contractors such as those at Heiler Painting often advise clients to save outdoor paint projects for either early fall or wait until the first summer months. The claim is these provide the optimal conditions with fewer rain showers and the least fluctuations in temperature.
When You Should Paint The Exterior Of Your Home
One way to completely transform the curb appeal of a home is to paint the exterior. You only get one chance to make a first impression, so it needs to be done right the first time. That means everything needs to fall into place so that the paint goes on smoothly and dries perfectly, which includes the temperature and the weather conditions.
Expert painting contractors often advise clients to approach an outdoor painting project in the early summer months when there is little chance for a freeze at night. The claim is that most brands of outside paints mandate a minimum of approximately 50 degrees ambient temperature. Outside that range and there’s a risk for a poor application. June through the beginning of September are the ideal months for this type of work.
A quality professional job should last upwards of 5 years, with hand painting producing successful results for up to 15 years. It’s crucial to find an expert who doesn’t skimp but instead puts in the time, effort, and energy to ensure the work is done more than adequately. Painting a home’s exterior requires dedication, skill, and experience.
Tips On Painting The Outside Portion Of A Home
There are multiple steps involved in the process. It’s not something you can merely hop on a ladder and begin. The right contractor will take extra care in preparing the surface in order to achieve more successful results. Make sure that these are followed or if you choose to DIY you want to make sure to take care of the following:
- First Step: To achieve the best coverage possible, the surface of the home needs to be free of the buildup of dust and debris. These can be taken off using a pressure washer, which should be done from the top of the structure down using smooth motions in a controlled manner. The suggestion is to go over on every stroke in 8″ overlaps.
- Second Step: The entire surface should be inspected for any flaws or damages to the material regardless of the type of compound, whether it be masonry, stucco, metal, siding, or wood. If there are any cracks or holes, the application of an epoxy filler will be needed, after which the spots will need to be lightly sanded. Read a variety of tips and techniques for those who want to do the project on their own.
- Third Step: Once all the damages, cracks, crevices, and holes have all been cleaned up, the contractor will need to remove any areas where there are loose or chipped old painted spots using a scraper or a medium sanding block. Drop cloths must be placed around to catch any loose paint droppings on the ground.
- Fourth Step: There will be gaps in between the trim and the house where the doors and windows meet for which caulk will be needed to fill the area. If the home is constructed of different materials, caulking will have to go into the surfaces where these materials meet.
- Fifth Step: All the light fixtures, windows, and doors need covering with plastic sheeting for protection, after which begin the painting process. The suggestion is to opt for a flat or eggshell option in either loading a paint sprayer or working by hand. The intensity of the color will determine whether you choose to use a one or two-coat application over the whole house.
Contractors will work from the top of the house to the bottom using a controlled, smooth technique, again, with an overlap on each stroke of 8″. Whether you go from a light hue to darker or vice versa, there should be a primer applied to the home so that proper coverage is achieved. It’s not necessary if this is the only color being used to freshen the look merely.
Once the siding is finished, go back and remove the plastic from the fixtures, windows, and doors so that these pieces can have a semi-gloss accent color added by hand, at which point the job is complete.
Most homeowners like to try to tackle remodels and renovations in a DIY capacity as a means to fulfill a sense of accomplishment. But this is a massive undertaking and the expectations are high concerning the prominence of a home’s outdoor appearance, it’s often a good idea to allow the experts to take the lead unless there is a personal level of experience in the family.
Professional contractors have the skills and the knowledge to give the optimum in curbside aesthetics to a home, but they can also offer advice on the color scheme that will work for the neighborhood. They can further advise you on how the shades will appear in the correct lighting, which is challenging doing with the naked eye. For ideas on the most used colors for houses go to https://home.howstuffworks.com/home-improvement/construction/materials/most-used-house-colors.htm.
You’ll want to begin researching for contractors a few months before the prime time of early summer if you’re going to get your project done timely. Everyone hopes to get quality work at the best time of the year.