What Inspections Are Needed When Buying A House?

Congratulations! You are close enough to acquiring your brand-new dream house. But before you sign the papers and hand over your cash, you need to give the house one last thorough checkup to ensure that everything looks great and most importantly, is in the finest working condition.

This means that you need to check if the roof tiles are brand new and not distorted or falling apart; the ceiling of your rooms are not showing any signs of decay; the walls aren’t falling apart and the bathroom and kitchen sinks are working optimally among other aspects.

So, to understand what inspections are needed when buying a house, we’ve prepared this article as a checklist to ensure you check every nook and cranny of your potential property before you put pen to paper.

New home

Now, let’s have a look at some of the things that you need to inspect in what could be your new home:

1.   General Home Inspection

There’s no point moving into a new home if you’re walking into a variety of interior and exterior issues.  Some of the basic things to look out for include foundation, roof, electrical system, plumbing and anything else that makes a home.

Here are a couple of the most common exterior issues you need to look out for:

  • Weakened roof
  • Trim and wood rot
  • Window issues
  • Chimney repointing or cracking issues
  • Porch or deck structural issues
  • Grading issues that cause possible water penetration
  • Bulkhead issues

Here are some of the most common interior issues to look out for:

  • Leaking pipes by the boiler
  • An expired heating system
  • Foundation structural cracks
  • Broken window or skylight seals
  • Grounding issues, doubt tapped breakers as well as no GFCI protection.

2.   Appliances

One of the most essential inspections needed when buying a home is appliances. You might have a brand-new oven or fridge in the kitchen, but that doesn’t necessarily mean that they’re working to the best of their abilities.  Appearances aren’t the end-all-be-all because it will only be too good to be true especially when you find a later that the appliance is bugged all over.  Therefore, you should always inspect the performance of these appliances to ensure they’re working efficiently and optimally, otherwise, this is one heck of a deal-breaker.

3.   Exterior Tilts and Cracks

The inside of your house may smell fresh thanks to the incredible paint job and floor varnish.  However, you should also pay great heed to the exterior as it could cost you a pretty penny if you’re not careful.  One time in San Francisco when a Victorian house was bought for $1.45 million.  Sure, it looked fine from the outside, but the homeowner later discovered several external issues along the way, including a rotted door, some decayed siding, and other considerable foundation problems.

A year later, that house was completely demolished.  And why did that happen you ask?  It’s because when a property gets rehabbed, there’ll be a slew of problems that homeowners will encounter along the way the more they dig around.  Doing so will not only put them in a more difficult financial situation, but it will also leave them severely compromised.

One way to avoid this is to sneak a demolition into the whole thing to spare yourself from permit fees and build an entire structure for a flip.  But you’ll need to have a lot of cash on the side to pay the building department employee who has to approve the new structure you’re going to build.

If you’re looking for a proper home somewhere in South Aurora and want to avoid all of the aforementioned issues, then you need to contact Ballymore Homes.

4.   House Plumbing

House plumbing is another reason why people ask “what to inspect when buying a house”.  If the home inspector finds anything off with the plumbing of the house, they might have to call a specialist.  And if this happens, then you might be faced with an expensive task of replacing pipes, fixtures, sinks, etc.

So, to prevent this issue from becoming an even heavier burden for your wallet, you need to inspect everything that’s related to your water supply.  It may be a bit of too much effort from your side when it comes to testing, but it’ll be worth it especially when it concerns your investment.

Check the bathroom and kitchen sink to see if the plumbing is okay.  One of the simplest ways of finding out if there’s an issue with your plumbing is to look for leaks.  If you have to, you can also consult a plumber’s expertise to inquire about the health of the connected pipes and the septic tank.  And don’t forget about the water and gas pipes.

5.   Look into Weird Smells

House inspection also requires that you keep your nostrils active as well.  This means keeping your nose out for unpleasant odors or smells that permeate within the exteriors of your potential property. 

Be sure to take a deep whiff inside every room you enter, from the bedrooms to the bathrooms and the basement.  Pay close attention to the ceiling, walls, and the flooring for any signs of mildew, smoke, or pet accidents.  With that in mind, you need to also be wary of exterior smells as well, although this is a little difficult to do so.

6.   Mold

With the kind of damage that mold can bring to homeowners, it is no wonder many buyers turn away from a potential deal.  There are several types of mold that you need to be wary of, including some that are hazardous to human health.  The most concerning mold that you need to be aware of is Stachybotrys chartarum, which is a toxic mold that needs to be taken care of immediately.

Obviously, you’ll have no other choice but to remove the mold before moving in.  However, doing so is not cheap as the cost can vary significantly from one company to another.  That’s why we suggest comparing the prices from a number of professional mold-removing companies.